澳洲10计划app

Tec-thane III is a two-component modified-acrylic urethane enamel having unsurpassed gloss and color retention. The hard slick Tec-thane film is very resistant to dirt , stains, acids, alkalis, solvents and petroleum fuels. Provides "wet look" depth of gloss with no clear coat and faster handle times than other high-depth urethanes.

Designed for use in the transportation,chemical processing, oil field, marine, bridge, steel tank and miscellaneous equipment industries. An excellent top coat over epoxy coatings where gloss and color retention is paramount. Can be used over properly prepared primed and unprimed metal, masonry, fiberglass, plastic and wood. Dries quickly with outstanding gloss. Has outstanding acid resistance.

VOC 2.94 lb./gallon (white; mixed)

59% by volume, 72% by weight

Greater than 7 mils

Direct-to-metal (3 mils DFT): Pass 500 hours
Over TS-140 primer (3 mils DFT): Pass 3000 hours

(over TS-140 primer) Pass

Greater than 90 % gloss retention

unaffected

Backto top

澳洲10直播

Description:







Environmental Codes:

Tec-thane is a two-component acrylic urethane enamel having unsurpassed gloss and color retention. The hard slick Tec-thane film is very resistant to dirt, stains, acids, alkalis, solvents and petroleum fuels.



VOC 3.65 lb./gallon (white; mixed)

Designed for use in the transportation, chemical processing, oil field, marine, bridge, steel tank and miscellaneous equipment industries. An excellent top coat over epoxy coatings where gloss and color retention is paramount. Can be used overproperly prepared and primed metal, masonry, plastic and wood.

Iron/Steel: TS-140 (severe environments) or P-523 (mild environments) Wood: This product is self priming; apply 2 coats
Aluminum/Galvanized: TS-140 Epoxy Primer and E-6002 Epoxy Primer Masonry: E-6002 Epoxy Primer
Fiberglass: This product is self priming, apply 2 coats or TS-140 Epoxy Primer may be applied.

Florida exterior: 12 months- 94% gloss retention
24 months- 78% gloss retention

(E-6000/AU-901system) Elcometer Adhesion Tester; not less than 800 psi pull

Method ASTM G-14-72: 160 inch pounds

Pencil hardness of 4H when tested according to ASTM D-3363-74

No blistering, cracking or delamination of film after 1,000 hours according to ASTM D-2247-68 method

70% gloss retention after 2,000 hours in a weatherometer

Backto top

Tec-Thane Aliphatic Polyurethane

Tec-thane polyester polyurethane is a high gloss, high performance, coating which exhibits outstanding resistance to spillage and fumes from most chemicals, acids, alkalis, solvents and water.

For use on steel tank exteriors, galvanized steel, equipment and structures, non-ferrous metals, concrete and masonry in highly corrosive environments or for prolonged exterior exposure. It is the finish coat in TCI's floor system. This product is also a performance alternate to MIL-C-83286 and MIL-PRF-85285.

E-8001 Epoxy Primer for severe or TS-140 for less severe environments.

VOC 4.19 lb./gallon (mixed)

Tec-Thane Moisture-Cured Polyurethane Sealer

This single component, moisture cured urethane is an amber-colored clear sealer which provides excellent hardness, and abrasion and chemical resistance.

Ideally suited for concrete or any area requiring a hard, clear sealer.

VOC 4.37 lb./gallon

澳洲10开奖记录网

Tec-thane Graffiti Shield is a hard and durable, clear aliphatic polyurethane coating formulated to resist a wide variety of chemicals including most graffiti while at the same time protecting the underlying substrate.

For use over properly prepared new metal, wood and masonry as well as previously painted surfaces. Provides a surface which allows for easy cleanup with common paint solvents and cleaners. Resists splash, fumes and spillage in aggressive chemical atmospheres.

VOC 4.45 lb./gallon (mixed)
Lead and chromate free

Backto top