澳洲10开奖

This is a rust inhibiting primer formulated for priming both interior and exterior iron or steel and is not recommended for use as a finish coat. This product is free of any lead pigments or drier.

For shop coating or field priming structural and miscellaneous steel. Intended for brush or spray application. Meets performance requirements of SSPC Paint #25.

VOC 3.55 lb./gallon
Lead free

P-523 Fast Dry Zinc Chromate

This fast dry universal primer is formulated for use over aluminum or steel. It has exceptional hiding power and performs best over clean surfaces. This product is free of any lead pigments or drier.

For use wherever a fast dry primer is needed for industrial product finishing and refinishing.

VOC 4.53 lb./gallon
Lead free

澳洲10走势图怎么看

This fast dry universal primer is formulated for use over aluminum or steel. It has exceptional hiding power and performs best over clean surfaces. This product is free of any lead pigments or driers.

For use wherever a fast dry primer is needed for industrial product finishing and refinishing. It is excellent for wrought iron fencing and furniture.

VOC 5.09 lb./gallon
Lead free

Back to top

AEP-8989 Tec-Seal Primer/Sealer

This single-component synthetic primer/sealer is designed as a quick drying undercoat for use under alkyd, acrylic, and polyurethane enamels. Provides excellent enamel hold-out for maximum gloss.

Formulated for O.E.M. (original equipment manufacturer), fleet or general industrial applications. Can be used direct to metal (DTM) or as a sealer over acrylic lacquer primer surfacers or over TCI's TS-140 Epoxy Primer.

VOC 4.56 lb./gallon
No lead or chromate hazards

High Solids Low VOC Primers

These products are designed as fast dry, low VOC primers for miscellaneous steel. Lead and chromate free corrosion inhibitors and high solids content keep these products within current regulatory guidelines.

For use wherever a fast dry primer is needed for industrial product finishing and refinishing. These products are a suitable performance alternate to federal specification TT-P-636 and TT-P-645.

No lead or chromate hazards
P-569 red: VOC 2.9 lb./gallon
P-581 white: VOC 3.2 lb./gallon
P-583 gray: VOC 3.5 lb./gallon

Back to top

P - 589 Universal Gray Primer

This product is a modified-alkyd, fast drying, rust inhibiting universal primer that is formulated for priming both interior and exterior iron or steel. It provides good durability and protection in exposure to weather.

Intended for use in applications where structural fabrications depend on rapid handling of primed steel.

VOC 4.37 lb./gallon
Lead and chromate free

P-998 and P-999 Economical Mill-End Primers

These fast drying primers are formulated for priming both interior and exterior iron or steel. They are not intended as a finish coat.

Designed for shop coating structural and miscellaneous steel.

Approx. VOC 4.5 lb./gallon
May contain lead and/or chromate
Color varies from batch to batch

澳洲10app登录

This two-component, organic-zinc-rich primer exhibits galvanic protection and provides a foundation for easy recoat with a variety of chemical-resistant high performance coatings. This product meets the specification for SSPC Paint No. 20, II.

This product is designed for use in industrial, marine and process environments. A topcoat is required for more severe exposures. There is greater than 80% zinc in the dry film.

VOC 4.01 lb./gallon (mixed)

Back to top

澳洲10开奖官方

A high performance, semi-gloss epoxy primer designed to cure at ambient temperatures and exhibit excellent resistance properties to a wide variety of chemicals and corrosives. Has excellent adhesion, sag resistance and corrosion resistance.

Designed for use on airport runway systems, steel tanks, trailers, miscellaneous steel and concrete. Resists petroleum products (crude, sour crude, diesel fuel, hydraulic fluids, etc.), brine and other salt solutions, detergents and lubricants. Shows excellent holdout for 2K urethane products.

VOC less than 2.48 lb./gallon (mixed)

TS-140 Tec-Seal Epoxy Primer

This modified epoxy-polyamide primer is designed for the protection of steel, galvanized steel and aluminum substrates. It features fast dry and recoat, and good sandability along with excellent corrosion resistance. Its unlimited recoat window allows for priming and storing parts for later top coating.

Ideally suited for fleet, OEM, or general industrial applications. This primer is designed to be an undercoat for two-component urethanes.

VOC 4.55 lb./gallon (mixed)

Back to top